Panasonic Uj 260 Firmware
Panasonic Uj 260 Firmware ->>> https://shurll.com/2sBNAe
Some programs such as Nero Burning ROM cannot write to Blu-ray. I thought I had solved this problem by updating the firmware with DIGISTOR and their '3xDSD Fix Plus', however this didn't seem to work. After some searching, I found that some people said that updating the firmware of this drive would work, but it didn't. I also tried the 'DVD-ROM Fix Plus' firmware upgrade with no success.
Finally, I tried upgrading the firmware of the drive from the supplied.ISO file. The PCB on the drive was quite large, and I was worried that I would damage the board if I were to proceed manually. After a little searching, I found methods which allowed me to upgrade the firmware on the drive without needing to remove it. A Tantalum lifter was used to lift the board, and a Philips screwdriver used to remove the bottom two Philips screws.
While Panasonic will continue to update their firmware just for DVD drives, the updates will not work to the Uj 260 drive after the 1996 firmware update. Any attempt to push firmware updates to the drive will be treated as a 'tampered firmware installation' and the drive will be withdrawn from sale by Panasonic. 7211a4ac4a